Product Description

HF-Regulator II for TL5 lamps

HF-Regulator II for TL5 lamps

  • Name

    Product family information

    Flat, lightweight high-frequency electronic regulating ballast, using 1-10V protocol for TL5 fluorescent lamps


    The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard)
    Compliant with European and Asian norms and suitable for emergency lighting systems
    HF operation improves light quality, lamp lifetime
    Combined with controls, additional energy savings can be achieved


    Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life
    Smart power ensures constant light, independent of mains fluctuations
    Up to 60% reduction in energy consumption by using automatic lighting control systems
    Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement


    1-10V installations with daylight linking and/or movement detection (for energy savings)
    1-10V installations with remote control systems (combining energy savings with comfort)
    Installations with emergency back-up, according to IEC 60598-2-22
    • Add product
    • Add product
    • Add product
    Add product