Special protective coating in the lamp-, prevents products from contamination in case of accidental lamp breakage |
Easy identification in audit situations by blue ring at one end |
Special fluorescent coating gives good colour rendering |
Relatively high efficacy, both initially and during lamp lifetime, with high lumen maintenance |
Protects products from discolouring and loss of taste by 90% lower UV emission |
Compliant with HACCP regulations and supports HACCP certification |
Protective coating around the entire lamp
|
Blue ring around one end
|
Direct retrofit for all Standard and Super /80 TL-D lamps operating on conventional or HF gear
|
Highly efficient 3-band fluorescent coating in combination with New Generation pre-coating technology
|
Available in various colour designations
|
Low mercury dose
|
Recyclable at end-of-life, including the protective lamp coating
|
End-cap has green bottom plate to identify lamp as recyclable
|
For use where contamination resulting from lamp breakage must be prevented, e.g. in food preparation, health care, pharmaceuticals, cleanrooms etc.
|
Suitable for use in environments with increased risk of breakage, e.g. sports halls
|
Suitable for use in environmens where UV emission should be reduced (museums, libraries, archives, food industry, fashion shops, etc.)
|
Not suitable for closed luminaires (as indicated by two blue rings)
|
Recommended use in combination with self-stopping lamp control system
|
A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
|
It’s strongly recommended to replace Secura lamps before or at the moment the specified lamp life (50% failures @ 3 hrs switching cycle) is reached.
|
Mobile Apps
Lighting Hub
LED Road Calculator
LED Switch
hue
Social Feed
Videos